- 19 -
Copyright ©2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
•
To use
AUTO CLEAN
With the air conditioner running in COOL,
DRY,ENERGY SAVER mode,
press the
AUTO CLEAN
button.
To cancel
AUTO CLEAN
, or to stop an
AUTO CLEAN
cycle in process, simply press
the
AUTO CLEAN
button again. The
AUTO CLEAN
function will not operate if the
air conditioner is already off.
AUTO CLEAN
1
2
AUTO SWING
When the displayed
temperature is °C (or °F), you
can press this button to swith
to °F (or °C).
To turn the
AUTO CLEAN
function on, press
the
AUTO CLEAN
button while the air
conditioner is running in COOL,
DRY, ENERGY SAVER.
This function can only be selected
from the remote; it is not available
from the control panel. It must be
set each time you wish to run the
AUTO CLEAN
function.
AUTO CLEAN
is used to remove moisture from
the heat exchange coils. This helps prevent the
formation of mildew and odors.
AUTO CLEAN
will be displayed in the
LED diplay.
Press the POWER button to turn the air
conditioner off.
AUTO CLEAN
will run
the circulation and exhaust fans with the
compressor off for a few minutes after
the power is turned off.
AUTO SWING
function can only be activated
with the remote. When this function is on, the
air discharge will oscillate to
circulate air more evenly
through the room. To turn this
function off, simply press the
AUTO SWING
button with the
remote again.
With
AUTO SWING
off, you may also manually
adjust the air discharge to the desired position.
It will maintain this position until the air
conditioner is turned off or
AUTO SWING
is
activated.
6. OPERATION
