LG LG-510W Скачать руководство пользователя страница 99

Страница: 99 / 110

13. ENGINEERING MODE

A. About Engineering Mode

Engineering mode is designed to allow a service man/engineer to view and test the basic functions
provided by a handset.

B. Access Codes

The key sequence for switching the engineering mode on is 2945#*#. Pressing END will switch back
to non-engineering mode operation.

C. Key Operation

Use Up and Down key to select a menu and press 'select' key to progress the test. Pressing 'back'
key will switch back to the original test menu.

13.1 BB Test [MENU 1]

Baseband Test

A. LED [1-1]

This menu is to test the indicator LED on top left hand corner of a handset.

• Green On [1-1-1]

: Green light turns on

• Green Off [1-1-2]

: Green light turns off

• Red On [1-1-3]

: Red light turns on

• Red Off [1-1-4]

: Red light turns off

B. Backlight [1-2]

This menu is to test the LCD Backlight and Keypad Backlight.

• Backlight On [1-2-1]

: LCD Backlight and Keypad Backlight light on at the same time.

• Backlight Off [1-2-2]

: LCD Backlight and Keypad Backlight light off at the same time.

• Backlight value [1-2-3]

: This controls brightness of Backlight. When entering into the menu, the

present backlight-value in the phone is displayed. Use Left/Right key to
adjust the level of brightness. The value of the brightness set at last will
be saved in the NVRAM.

C. Buzzer [1-3]

This menu is to test the buzzer sound.

• Melody on [1-3-1]

: Melody sound is played through the buzzer.

• Melody off [1-3-1]

: Melody sound is off.

D. Vibrator [1-4]

This menu is to test the vibration mode.

• Vibrator On [1-4-1]

: Vibration mode is on.

• Vibrator Off [1-4-2]

: Vibration mode is off.

13. ENGINEERING MODE

- 98 -

Содержание LG-510W















































































































Результаты поиска

Содержание LG-510W

Отзывы:

LG LG-510W, Руководство по обслуживанию, Страница: 99 / 110

Результаты поиска

Содержание LG-510W

Отзывы: