Installation Guide
Dome Bracket Adaptor
Model: LFL1300
Introduction
This product is designed for installation of LG Dome
camera into the Wall Mount assembly (LBK1000W),
Pendant Mount assembly (LBK1000P) or Parapet Mount
assembly (LBK1000R) on the ceiling or wall.
The installable LG Dome Camera
-
LND3’s, LCV5’s, LCD5’s, LNV5’s, LND5’s, LND7’s, LNV7’s
and L9322 models
-
Refer to the owner’s manual of LG Dome Camera for
the compatibility of this product.
-
Actual set may be differ from the picture described
in this manual.
Installation Precautions
y
Make sure that the installation place can endure at
least 4 times of the total weight of the Dome Bracket
Adaptor, Camera, and Wall/Ceiling/Parapet Mount
Adaptor.
y
The Dome Bracket Adaptor can be also connected
to 1.5” NPT screw-thread pipe as well as to the Wall/
Ceiling/Parapet Mount assembly.
Specifications
y
Dimensions (Ø x H): 141 mm x 50 mm
y
Net Weight: 0.18 kg
y
Material: Aluminum
y
Operating Temperature: -50 °C to 60 °C
y
Operating Humidity: 0 to 100 %
WARNING:
This product contains chemicals known to the State
of California to cause cancer and birth defects or
reproductive harm.
Wash hands after handling.
Getting Started
Installation with L9322 model
Note:
This Bracket Adaptor supports only L9322 model produced later than August 2012.
a
b
c
d
Dome Bracket
Adaptor
(LFL1300)
Insert the Dome Bracket Adaptor to 1.5” NPT screw-
thread (female) pipe or to the Wall/Ceiling/Parapet
Mount Adaptor (LBK1000W/LBK1000P/LBK1000R)
and tighten the three pipe screws.
Make sure you fix the three pipe screws. If not
secured tightly, the Dome Bracket Adaptor
may loosen from the Pipe or Adaptor, causing
physical damage or malfunction.
(Make sure you check the connection between
two components before proceeding with the
next step.)
>
Warning
Assemble the housing of the Dome Camera to the
Dome Bracket Adaptor and tighten four screws.
Turn the Dome Cover clockwise to secure it to the
camera.
Assemble the camera and the housing and tighten
four screws. (Align the “FRONT” marks of the camera
mounting bracket and the camera assembly for
proper camera orientation.)
Accessories
-
Installation manual
-
Screw accessory
y
Screw Machine(M4 x L10.0 mm) (4 ea)
