13
EN
1
Turn the adjustable feet as required if the floor
is uneven.
•
Do not insert pieces of wood etc. under the
feet.
•
Make sure that all four feet should be stable
and resting on the floor.
2
Check if the appliance is perfectly level using a
spirit level
a
.
3
Secure the adjusting feet with the lock nuts
b
by turning counterclockwise against the bottom
of the appliance.
4
Check if all lock nuts at the bottom of the
appliance are secured properly.
NOTE
•
Proper placement and levelling of the appliance
will ensure long, regular, and reliable operation.
•
The appliance must be level and stand firmly in
position.
•
It must not ‘Seesaw’ across corners under the
load.
•
Do not let the feet of the appliance get wet.
Failure to do so may cause vibration or noise.
Connecting the Water Inlet
Hose
Note for Connection
•
Water pressure must be between
100 kPa
and
1000 kPa
(1.0 - 10.0 kgf/cm²). If the
water pressure is more than
1000 kPa
, a
decompression device should be installed.
•
Do not overtighten the water inlet hose to all
valves.
•
Periodically check the condition of the hose and
replace the hose if necessary.
Checking the Rubber Seal on the
Water Inlet Hose
Two rubber seals
a
are supplied with the water
inlet hoses. They are used to prevent water leaks.
Make sure that the connection to taps should be
sufficiently tight.
