4-5
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
5. FRAME ASSEMBLY UP/DOWN (FIG. 4-4)
Note
Put the Base Main face down (Bottom Side)
1) Release the screw (S4)
2) Unlock the Locking Tab (L3) in direction of arrow
and then lift up the Frame Assembly Up/Down to
separate it from the Base Main.
Note
• When reassembling move the Guide Up/Down in
direction of arrow(C) until it is positioned as
Fig.(C).
• When reassembling insert (A) portion of the
Frame Assembly Up/Down in the (B) portion of
the Guide Up/Down as Fig.(B)
6. BELT LOADING(FIG. 4-4)
Note
Put the Base Main on original position(Top Side)
7. GEAR PULLEY (FIG. 4-4)
1) Unlock the Locking Tab(L4) in direction of
arrow(B) and then separate the Gear Pulley from
the Base Main
8. GEAR LOADING (FIG. 4-4)
9. GUIDE UP/DOWN (FIG. 4-4)
1) Move the Guide Up/Down in direction of
arrow(A) as Fig.(A)
2) Push the Locking Tab(L5) down and then lift up
the Guide Up/Down to separate it from the Base
Main.
Note
When reassembling place the Guide Up/Down as
Fig.(C) and move it in direction arrow(B) until it is
locked by the Locking Tab(L5). And confirm the Guide
Up/Down as Fig.(A)
10. PWB ASSEMBLY LOADING (FIG. 4-4)
Note
Put the Base Main face down(Bottom Side)
1) Release 1 Screws(S5)
2) Unlock the Loading Motor (C2) from the Hook
(H1) on the Base Main.
3) Unlock 2 Locking Tabs(L6) and separate the
PWB Assembly Loading from the Base Main.
11. BASE MAIN (FIG. 4-4)
GEAR LOADING
GEAR PULLEY
BELT LOADING
PWB ASSEMBLY LOADING
BASE MAIN
GUIDE UP/DOWN
GUIDE UP/DOWN
GUIDE UP/DOWN
UP/DOWN FRAME ASSEMBLY
GUIDE UP/DOWN
BASE MAIN
(L4)
(H1)
(C2)
(S5)
(A)
(A)
(B)
(B)
(C)
(L5)
FIG. (A)
FIG. (B)
FIG. (C)
(A)
(B)
SCREW INSERTION
TORGUE CONTROL
(800gf DOWN)
FIG. 4-4
