LG DFB325 Series Скачать руководство пользователя страница 13

Страница: 13 / 56

INSTALLATION

ENGLISH

Preparing Cabinet Opening

Choosing the Proper Location

• Install the appliance on a flat and stable area

floor.

• Cut out for hoses and electrical cables on either

side. (Approximately 100 mm X 75 mm)

• Select a location as close to the sink as possible

for ease of connection to the water and drain

pipes.

• To ensure drainage, the appliance should not be

installed more than 1 metre away from the sink.

• If the appliance is installed in a corner, allow

minimum clearance of at least 50 mm between

the appliance and an adjacent cabinet or wall.

• Before sliding the appliance into the installation

opening, all necessary height adjustments

should be made using a spanner.

CAUTION

• Any bare wood surrounding the appliance

should be sealed with a waterproof paint or

sealant to prevent it from swelling.

• Slide the dishwasher into the cabinet, opening

carefully. Make sure that the drain hose behind

the machine and inside the cabinet is not kinked

or stretched.

• Install the appliance on a flat and stable area. Do

not place any objects in-between the floor and

base or leg off the appliance.

NOTE

• This installation must be conducted by qualified

service personnel to ensure it has been installed

correctly.

• Do not pull or lift the appliance using the handle;

dosing so can damage the door and hinges.

Open the door and grab the body frame and the

top front opening of the tub to move or lift the

appliance.

• Do not push the door of the dishwasher with

knees.

Attaching the Strip to the

Appliance Base

To reduce noise attach the strip to the appliance

base.

≥

600 mm

820 - 870 mm

100 mm

600 - 605 mm

75 mm

Содержание DFB325 Series

























































Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды

LG DFB325 Series, Руководство пользователя

Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды