background image

3

SAFETY INSTRUCTIONS

EN

The following safety guidelines are intended to prevent 

unforeseen risks or damage from unsafe or incorrect 

operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ 

as described below.

This symbol is displayed to indicate matters and 

operations that can cause risk. Read the part with this 

symbol carefully and follow the instructions in order to 

avoid risk.
WARNING

This indicates that the failure to follow the instructions can 

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can 

cause the minor injury or damage to the product.

The following symbols are displayed on indoor and outdoor 

units.

This symbol indicates that this appliance uses a 

flammable refrigerant. If the refrigerant is leaked and 

exposure to an external ignition source, there is a risk 

of fire.
This symbol indicates that the Operation Manual should 

be read carefully.
This symbol indicates that a service personnel should 

be handling this equipment with reference to the 

Installation Manual.
This symbol indicates that information is available such 

as the Operating Manual or Installation Manual.

Содержание D12TR









































Отзывы: