Installing the Home Station
1.
Remove the protective film attached to the home station, the robot cleaner, and the nozzle.
2.
Position the home station against a wall on hard, level flooring to prevent sliding during docking.
•
Place the home station where there are no obstacles within 5 ft (1.5 m) of either side and within 6.5 ft (2 m) of
the front.
•
Do not place the home station in confined spaces, as the robot cleaner will have difficulty returning to the
home station.
3.
Wrap the unwanted length of power cable around the cord keeper on the rear of the home station to prevent
the robot cleaner’s wheels from rolling over the cable.
4.
Insert the power plug into an outlet.
5. Place the home station against the wall so that it does not move.
5 ft
(1.5 m)
5 ft
(1.5 m)
6.5 ft
(2 m)
Charging
1.
Insert the power plug of the home station into a power outlet.
2.
Turn on the robot cleaner’s main power switch
.
3.
Place the robot cleaner onto the charging terminals
by aligning it to the front side of the home station.
•
To return the robot cleaner to the home station during cleaning, press the
Home
button on the robot cleaner
or on the remote control. The robot cleaner moves to the home station to commence charging.
•
If power is not supplied to the home station, the robot cleaner will not be charged.
3
Operation
Before Cleaning
•
The robot cleaner can cross over thresholds that are up to 0.79” (20 mm) high depending on the shape and
material of the threshold.
•
The robot cleaner will navigate back to the home station easily, if cleaning is started at the home station.
•
Always keep the home station plugged in when in use. If the home station is not plugged in,the robot cleaner will
not return to the home station to charge automatically.
•
Check the following items before use:
‒
Remove cables or long strings from the floor.
‒
Roll up or remove thin mats or carpets with pile longer than 1/2” (12 mm).
‒
Remove fragile objects and obstacles from the floor.
‒
Remove furniture with thin legs.
‒
Close the doors of any room that you do not want the robot cleaner to enter.
Starting a Cleaning
1.
Insert the power plug of the home station into a power outlet.
2.
Press the
Mode
button to select the desired mode.
3.
Press the
Start/Stop
button to start cleaning.
MEZ66331069
Rev.00_041320
Getting Started
