30
206-4122
Configuration Options via GUI (Cont.)
Set the Satellite OSD On or Off
1. With the Satellite STB Menu on display, click on the down arrow at the right of the Card
Select field, and select the appropriate transcoder card from the drop-down list of options.
2. Either:
• Click on the
OSD On
button at the right of the STB OSD On field
to enable on-screen
display for the video signal at the HDMI output.
• Click on the
OSD Off
button at the right of the STB OSD Off field
to disable on-screen
display for the video signal at the HDMI output. Note that the Ethernet video stream does
not contain on-screen display.
Reset the Satellite STB
1. With the Satellite STB Menu on display, click on the down arrow at the right of the Card
Select field, and select the appropriate transcoder card from the drop-down list of options.
2. Click on the
Reset
button at the right of the Reset STB field
to reset the satellite STB.
The system displays confirmation, for example:
Card 1: The STB is resetting...
After reset, the satellite STB resumes normal operation.
Read the STB Activation Status
1. With the Satellite STB Menu on display, click on the down arrow at the right of the Card
Select field, and select the appropriate transcoder card from the drop-down list of options.
2. Click on the
Read
button at the right of the STB Activation Status field to display the
activation status—activated or not activated—of the satellite STB.
