LG CM9740, Руководство пользователя

Страница: 37 / 44

Operating 37
Oper
ating
3
To select recording bit rate and
speed
1. Press USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press C / V on the remote control or
Y / U on the unit to select a bit rate.
3. Press
USB REC
on the unit or
USB REC
on
the remote control again to select the recording
speed.
4. Press C / V on the remote control or
Y / U on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC
on the unit or
USB REC
on
the remote control to finish the setting.
Dubbing USB to USB
You can do dubbing a various sound source in
USB1
to
USB2
on USB function.
1. Connect a USB device including desired sound
files to
USB1
.
2. Connect another USB device to USB2 .
3. Press USB REC on the unit or USB REC on
the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER
on the remote control.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
y
It is not supported to record music stored
on bluetooth device.
y
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
y
During recording MP3/WMA, there is no
sound.
y
For stable recording, the output sound level
goes down on its own when you record
music from CD to USB.
y
You can only change volume level between
MIN and 10 during recording. It will be kept
even after recording.
y
When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
y
Do not remove the USB device or turn off
the unit during USB recording. If does not,
an incomplete file may be made and not
deleted on PC.
y
If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
y
Multi card reader device or External HDD
can not be used for USB recording.
y
A file is recorded by about 512 Mbyte when
you record for a long term.
y
You may not store more than 999 files.
y
Sound of MIC or DJ Pro is recorded only
during audio CD 1 speed REC. It is recorded
audio CD source too.
y
It’ll be stored as follows.
AUDIO CD MP3/WMA
The other
source*
* : TUNER, AUX and the like.
,
Note
CM9740-DB_DGBRLLK_ENG.indd 37 2014-02-14 �� 10:21:27