5
ENGLISH
CAUTION
•
When placing the projector on a
table or shelf, be careful not to put
it near the edge.
-
The projector could fall due to
balance problems, which may
cause personal injury or damage
to the product. Make sure to use
the projector cabinet or stand
that fits the projector.
•
When moving the projector, make
sure to switch it off and remove the
power plug and cords.
-
The power cord may be
damaged, resulting in fire or
electric shock.
•
Do not place the projector on an
unstable or vibrating surface such
as a wobbly shelf or a slope.
-
It may fall and cause injury.
•
Be careful not to tip the projector
over when connecting external
devices to the projector.
-
This may cause personal injury
or damage to the projector.
Power
WARNING
•
DISCONNECTING THE DEVICE
FROM THE MAIN POWER
-
The Power plug is the
disconnecting device. In case of
an emergency, the Power Plug
must remain readily accessible.
•
The grounding wire should be
connected. (Except for devices
which are not grounded.)
-
Ensure that you connect the
grounding cable to avoid electric
shock. If it is not possible to
ground the unit, have a qualified
electrician install a separate
circuit breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning rods
or gas pipes.
•
The power plug should be inserted
fully into the power outlet.
-
An unstable connection may
cause a fire.
•
Do not place heavy objects on the
power cord.
-
This may result in fire or electric
shock.
•
Never touch the power plug with
wet hands.
-
This may result in electric shock.
