LG Centric PCS150R Pro Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 35

LG Centric PCS150R Pro Скачать руководство пользователя страница 8

8

206-4157

Setup Information

Check the following items before you begin the PCS150R installation and setup procedures.

ASI Output (Optional)

__ If the system is using ASI ouput, install the modulator and upconverter that will receive the

ASI output signal from the PCS150R. Refer to the manufacturer’s documentation.

PCS150R

__ Unpack the PCS150R Pro:Centric server unit and all accessories.

PCS150R Accessories:

• AC Power Cord and Adapter

__ Select the location for mounting the PCS150R. Ensure that adequate ventilation is

available.

__ Obtain the necessary attachment hardware to mount the PCS150R chassis in its targeted

location.

__ Plan and install the necessary cabling and network (Ethernet) and AC power access for

the PCS150R.

You also will need the following to connect a PC directly to the PCS150R for system setup

verification purposes:

• DB9 Male-to-DB9 Female RS-232 straight-through serial cable (Example: Cables Unlimited

PCM-2100-06 serial cable).

• (Optional) USB 2.0-to-serial DB9 adapter (Example: Cables Unlimited USB-2920 adapter).

If there is no serial port on the PC, use the adapter to connect the serial cable to the PC.

«
...
6
7
8
9
10
...
»

Содержание Centric PCS150R Pro




































Отзывы:

Нет отзывов