24
206-4157
PCS150R Configuration Options (Cont.)
(Continued from previous page)
New Network Configuration
Interface eth0
Host name: pcs150r
Using DHCP: YES
Interface eth1
Host name: pcs150r
Using DHCP: NO
Host IP address:
10.165.60.92
Network mask: 255.255.255.0
Gateway IP address:
DNS servers
Primary DNS:
68.94.156.1
Secondary DNS:
68.94.157.1
Do you want to save the new configuration? (Y/N):
11. Type
y
or
n
and press
Enter
, as appropriate.
If you opt NOT to save the new configuration, the system will return immediately to the
Main Menu
Command >
prompt. Otherwise, the system will confirm the configuration
updates and prompt you to reset the PCS150R:
New configuration has been saved. Please restart the system.
12. If you are ready to reset the PCS150R immediately, at the
Command >
prompt, type
reset
and press
Enter
(see “Reset the PCS150R” on page 29 for further information).
Note:
If you intend to modify additional configuration settings during the current session,
you may wait until all changes are complete before you reset the PCS150R.
Set the Time Zone
1. Log in to the PCS150R as described on page 19.
2. At the
Command >
prompt, type
tz
and press
Enter
.
The system displays the current time zone information for the PCS150R and prompts you
to specify whether or not you wish to change the time zone.
Current time zone is: America/New York
Change the time zone? [y/n]:
3. Either:
• Type
n
and press
Enter
to return to the Main Menu
Command >
prompt without changing
the current time zone.
• Type
y
and press
Enter
to change the time zone. Then, continue with step 4.
(Continued on next page)
