LG Centric 32LP645H Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 77

background image

6

206-4232

Commercial Mode Overview

This document describes how to set up LP645H Pro:Centric

®

TVs for Commercial Mode operation. LG

commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides

in the TV’s CPU, Protocol Translator Card (PTC), or embedded

b

-LAN™ (EBL) module, or it resides

externally from the TV (i.e., in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the

EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU

nor EBL is in FTG Mode, these TV models also allow external control via the TV’s MPI port.

Setup Checklist

Note:

This document provides information specific to Commercial Mode operation. Refer to the Quick

Reference Guide for information on TV installation and hardware and cable connections.

Installation

__ Unpack TV and all accessories.

__ Install batteries in the Installer Remote.

__ Install TV on VESA mount or stand.

Note:

It may be advisable to make all cable

connections before installing on VESA mount

or stand, as appropriate.

Hardware Connections

__ Install any additional hardware as

appropriate to your institution, LAN, etc.

Cable Connections

__ Make all rear jack panel and MPI card slot

connections, as appropriate.

Commercial Mode Setup

__ Complete appropriate procedures as described

in this document for Commercial Mode operation.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric or FTG Mode via CPU operation and/

or create a Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. This

mode also allows external control via the GAME CONTROL/MPI port on the TV rear jack panel.
There are two methods for configuring individual TVs that are currently in Pass-through Mode: either

using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.

EZ-Manager Wizard

The EZ-Manager Wizard provides automated or manual options for configuring essential items for

Pro:Centric operation and also provides an option for using a USB memory device to configure the TV.

Use the Installer Remote to make selections and complete each step. See “EZ-Manager Wizard” on pages

11 to 17 for detailed information.

Custom Master TV Setup

The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for cloning

purposes. Use the Installer Remote to configure Installer Menu items as required for TV operation and

set up TV features (Channel, Picture, Audio, etc.). See “Custom Master TV Setup” on pages 29 to 32 for

detailed information.

«
...
4
5
6
7
8
...
»

Содержание Centric 32LP645H














































































Отзывы:

Нет отзывов

Похожие инструкции для Centric 32LP645H

Бренд: TCL Страницы: 15

Бренд: Salora Страницы: 29

Бренд: YAKUMO Страницы: 27

Бренд: Zenith Страницы: 65

Бренд: Grundig Страницы: 18

Бренд: Tesla Страницы: 136

Бренд: Zenith Страницы: 43

Бренд: RCA Страницы: 88

Бренд: Teac Страницы: 33

Бренд: NABO Страницы: 73

194G-GB-TCUP-UK

Бренд: e-motion Страницы: 32

Бренд: Dynex Страницы: 2

Бренд: Schaub Lorenz Страницы: 77

Бренд: GE Страницы: 21

Бренд: GE Страницы: 16

Бренд: GE Страницы: 32

Бренд: GE Страницы: 40

Бренд: GE Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды