11
206-4232
EZ-Manager Wizard
The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual)
of configuring the essential Installer Menu items for Pro:Centric TV operation. The wizard will appear on the
screen each time the TV is turned ON, until one of its configuration methods has been completed or the
wizard is exited. Use the Installer Remote to make selections and complete each wizard step.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the wizard also
offers Zoning as well as USB configuration options.
• LP645H TVs support the TV Zoning feature, which enables location-specific settings (see Reference
section, “Using the TV Zoning Feature,” for further information). The EZ-Manager Wizard enables you to
set the TV Zone # in the TV as part of the configuration process.
• The EZ-Manager Wizard also enables you to redirect to the TV’s standard USB Download Menu as part
of the configuration process, if desired, to perform USB configuration functions, including FTG Mode via
CPU configuration, cloning, and software upgrades.
• You can connect a USB memory device to the TV at any time while the wizard is in progress (either at the
Welcome level or beyond) to use the LG Smart Install utility to perform USB configuration functions. Any
file(s) you wish to use for configuration purposes must be stored in a folder named “LGSMARTINSTALL”
in the root directory of the USB memory device. See “LG Smart Install Utility” on pages 18 to 19 for
further information.
Caution: Do NOT unplug the TV power cord or remove the antenna cable during the
configuration process, as doing so will interrupt the current step and may corrupt the
configuration data.
Before You Begin
• If you plan to create a Master TV Setup using the procedure described on pages 29 to 32, be sure to
exit the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup proce-
dure. See also “Initiate Configuration or Exit the EZ-Manager Wizard” on the following page.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can be
reactivated; however, this requires that you perform an “IN-STOP” to restore factory defaults on the
TV(s). Refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction. If the
Pro:Centric server is configured on the system and if no location-specific settings are required in the TV,
for example, for TV Zone, Label, and/or Room Number settings, you can simply turn ON the TV, and once
initiated, the wizard will proceed through each of the configuration steps with no further user interaction.
• If any of the configuration steps fails, you will see a “Diagnostics” screen with an indication of the failure.
You will then have the opportunity to reinitiate the configuration process from the previous screen or exit
the EZ-Manager Wizard.
