manualshive.com logo in svg

LG AS-H076QGA2/QNA2, Руководство по обслуживанию, Страница: 6 / 68

Поделиться
Скачать
LG AS-H076QGA2/QNA2 Скачать руководство пользователя страница 6

6

Room Air Conditioner

Safety Precautions   

Do not install the product on a defective instal-
lation stand.

Be sure the installation area does not 
deteriorate with age.

• It may cause injury, accident, or damage to the

product.

• If the base collapses, the air conditioner could fall

with it, causing property damage, product failure,
and personal injury.

• Sharp edges could cause injury. Be especially care-

ful of the case edges and the fins on the condenser
and evaporator.

• There is risk of fire, electric shock, explosion, or injury.

Be cautious when unpacking and installing the
product.

For installation, always contact the dealer or
an Authorized service center

For re-installation of the installed product,
always contact a dealer or an authorized ser-
vice center.

Do not install, remove, or re-install the unit by
yourself.

• There is risk of fire, electric shock, explosion, or

injury.

• There is risk of fire, electric shock, explosion, or

injury.

Содержание AS-H076QGA2/QNA2





































































Отзывы:

Нет отзывов