manualshive.com logo in svg

LG AS-H076QGA2/QNA2, Руководство по обслуживанию, Страница: 5 / 68

Поделиться
Скачать
LG AS-H076QGA2/QNA2 Скачать руководство пользователя страница 5

Service Manual 

5

Safety Precautions  

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must
be followed.

■

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.

■

Meanings of symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

Be sure not to do.

Be sure to follow the instruction.

Do not use damaged power cords, plugs, or a
loose socket.

Always use the power plug and socket with the
ground terminal.

• There is risk of fire of electric shock.

• There is risk of electric shock.

Install the panel and the cover of control box
securely.

.Do not modify or extend the power cord.

• There is risk of fire of electric shock.

• No grounding may cause electric shock.

■

Installation

Содержание AS-H076QGA2/QNA2





































































Отзывы:

Нет отзывов