manualshive.com logo in svg

LG ARTCOOL LA121CNM, Руководство по обслуживанию, Страница: 3 / 71

Поделиться
Скачать
LG ARTCOOL LA121CNM Скачать руководство пользователя страница 3

Service Manual  3

Safety Precautions  

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must
be followed.

■

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.

■

Meanings of symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

Be sure not to do.

Be sure to follow the instruction.

■

Installation

Do not use damaged power
cords, plugs, or a loose socket.

• There is risk of fire or electric

shock.

For electrical work, contact the
dealer, seller, a qualified electri-
cian, or an Authorized Service
Center.

• There is risk of fire or electric

shock.

Always use the power plug and
socket with the ground terminal.

• There is risk of electric shock.

Install the panel and the cover of
control box securely.

• There is risk of fire or electric

shock.

Do not modify or extend the
power cord.

• There is risk of fire or electric

shock.

Do not install, remove, or re-
install the unit by yourself (cus-
tomer).

• There is risk of fire, electric

shock, explosion or injury.

Содержание ARTCOOL LA121CNM








































































Отзывы:

Нет отзывов