LG Aria LDK 300, Руководство пользователя

Страница: 8 / 87

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
1.3 Preparation
Below table shows the maximum cell number, maximum registrable terminal number, and
maximum simultaneous wireless call number in different configurations of GDK-
186/100/34E/20W & LDK-130/300/600 system and the applicable S/W version of GDC-345H
handset. Please note that only one(1) WTIB(with WTIU) board can be installed in GDK-
186/100/34E/20W system, one(1) WTIB board can be installed in LDK-24 system, two(2)
WTIB(with WTIU) boards can be installed in LDK-130 system and three(3) WTIB(with WTIU)
board can be installed in LDK-300/600 system. (The WTIU board is not prepared in the GDK-
20W system.)
Items
System
Name
1. Board
Name
2. Max.
Cell Number
(Base Station
Num.)
3. Channels/
Cell
4. Registrable
Max.
Terminal Number
5. Max.
Simultaneous
Wireless Call
6. Applicable
SW version
(GDC-345H)
WTIB 3 5 8~96 by step 8 15
GDK-186
With WTIU 6 5 8~96 by step 8 30
All version
WTIB 4 5 8~64 by step 8 16
GDK-100
With WTIU 8 5 8~64 by step 8 32
All version
WTIB 4 5 8~32 by step 8 16
GDK-34E
With WTIU 8 5 8~32 by step 8 16
All version
MBU 1 4 20 4
GDK-20W
WTIB 3 4 20 12
All version
LDK-24 WTIB 3 2 12 6 All version
WTIB
(MAX. 2)
4 ( x 2 ) 5 8~80 by step 8 32
LDK-130
With WTIU
(MAX. 2)
8 ( x 2 ) 5 8~80 by step 8 64
All version
WTIB
(MAX. 3)
4 ( x 3 ) 5 8~192 by step 8 48
LDK-300/600
With WTIU
(MAX. 3)
8 ( x 3 ) 5 8~192 by step 8 96
All version
The wireless terminal should be subscribed before using it. (Please refer to ‘ 6. Installation of
Wireless Terminal ’)
A call may be failed even when free channels exist due to unexpected changes of radio
environment.
When all channels are occupied, no more call can be made. In this case, a user should wait
until a channel becomes free.
The S/W of a wireless terminal can be updated by the manufacturer.
The working area of your hand-held type wireless terminal is limited to the domain of the
coverage area of a wireless system, which may be adjusted to a premise of an organization,
an office, or a company. Using a terminal outside of this area will bring unsatisfied results.
A hand-held type wireless terminal is not specified as intrinsically safe. So do not use it in
hazardous area or intent.
If a user doesn’t use matched configuration, the normal operation can’t be guaranteed.
If you are out from the range of a base station for a long time with your handset power-
on, it may fail to find the base station again when you are in the range. In that case,
refresh the power of the handset or press “[MENU key] + [3] + [OK key]”
２