14
HOW TO USE
ENGLISH
Example)
Dust particle size
Dust density display
Odor/dust display part
Overall cleanliness color display
•
Explanation on the display
: Since PM1.0 density is Bad(Orange) with 80μg/m3, display dust
at the odor/dust display. Since ‘odor’ is displayed at the odor/dust display, odor density is also
strong. Since PM1.0 is displayed at the dust particle size display, the density level of PM1.0 is
higher than that of PM10 or PM2.5
Reference
•
PM10 and PM2.5 cleanliness follows the provided by the Ministry of environment(Air
KOREA). (2015)
-
The overall cleanliness level displayed on the product may be different from a level
announced by Ministry of environment(Air KOREA).
•
The dust density level for PM1.0 has been displayed in the same manner as the dust
density level for PM2.5. (LG Electronics standards)
• The displayed density of PM10 / PM2.5 could differ from the forecast of the Ministry of
environment(Air KOREA) and from other measurement devices or products.
-
Indicated dust concentration values can differ from each other depending on the
differences in dust measuring methods and also from real dust concentration levels.
-The assessment of dust density was made against dust used for LG Electronics
standards tests.
• In case you use the product which generates steam and micro particles (humidifier,
cooling device, spray, etc.), micro dust density could change.
• Since the cleanliness display shows overall dust and odor, it could differ from the density
value of PM10, PM2.5, and PM1.0.
• Even in the same space, the PM10 density value could differ from other products due to
air circulation.
•
The overall cleanliness display could change in response to the chemicals contained in
air freshener, perfume, deodorizer, and cosmetics.
•
The displayed dust density value could change depending on the installation environment
(affected by sofa, bed, carpet, vacuum cleaner, humidity, smoke, bugs, fats, etc.)
•
The displayed density value of PM10/PM2.5/PM1.0 could change depending on the
surrounding environment (construction site, road side, plant, etc.)
•
The density of micro dust could be measured high near exit doors, windows, and
ventilation holes or under the environment where outside air flows in.
•
Do not clean the sensor with other materials other than alcohole or water. It may cause
product failure.
