manualshive.com logo in svg

LG A2UQ166FA0, Руководство по обслуживанию, Страница: 107 / 238

Поделиться
Скачать
LG A2UQ166FA0 Скачать руководство пользователя страница 107

Service Manual  107

Control Devices and Function

Control Devices and Function

Features

On/Off display LED 
(TOTAL 16EA)

• On pressing individual on/off

button, display the present
operation state.

-Operation : green.
-Stop : off 
-Error mode : blinking

Power display LED

• Indicate the state of DC 

Power supply in central 
control unit.

- On : red(Heating), green(Cooling)
- Off : no signal
- Error mode : blinking with red color

TOTAL Off  button

• Stop all linked units sequentially.

Individual On/Off button

• Control ON/OFF of a unit.

TOTAL On button

• Operate  all linked units sequentially.

• Easy operation button.

• Independent operation for 16 indoor units each.

• Simultaneous turn ON/OFF for all of indoor units connected.

• Easy change operation mode to cooling or heating

• Set and clear lock-mode for each indoor unit

• Simultaneously set and clear lock-mode for all of indoor units

connected.

• Display function for all of indoor units connected.

Simple Central Control

Term of Each part and Function

Содержание A2UQ166FA0















































































































































































































































Отзывы:

Нет отзывов