LG 50UR770H0UA, Руководство по быстрой настройке

Страница: 44 / 52

36
ENGLISH
21 Channel(Programme) block/unblock
(Command:m d)
►
This command may work differently depending
upon model and signal.
►
For South Korea, North/Latin America except
Colombia Model
Transmission
(m)(d)( )([Set ID])( )(Data 00)( )(Data 01)( )(Data 02)
(Data 03)(Data 04)(Cr)
(Data 00): Physical Channel Number
(Data 01)(Data 02): Major Channel Number
- (Data 01): High Channel data
-
(Data 02): Low Channel data
00 00 ~ 27 0F (Decimal: 0 ~ 9999)
(Data 03)(Data 04): Minor Channel Number
-
(Data 03): High Channel data
- (Data 04): Low Channel data
(Data 05): Input Source
- 02: Antenna TV (DTV)
-
06: Cable TV (CADTV)
- 0b: Cable DTV Plus
(Data 06): block(01)/unblock(00)
Ack
(d)( )([Set ID])( )(OK/NG)(Data 00)(Data 01)(Data 02)
(Data 03)(Data 04)(x)
* Block/Unblock Command Examples
Block/Unblock Cable DTV (DVB-T) Channel 18-2
([Set ID]) = 01
(Data 00) = Physical Channel Number 18 = 12(HEX)
(Data 01) & (Data 02) = Major Channel Number is 18
= 00 12(HEX)
(Data 03) & (Data 04) = Major Channel Number is 2 =
00 02(HEX)
(Data 05) = cable DTV = 06
(Data 06) = block(01)/unblock(00)
Result:
md 01 12 00 12 00 02 06 (01/00)
22 Fail Over Mode (Command: m i)
►
Selects the Fail Over mode.
Transmission
(m)(i)( )([Set ID])( )(Data)(Cr)
Data 00: Off
Data 01: Auto
Data 02: Manual
Ack
(i)( )([Set ID])( )(OK/NG)(Data)(x)
23 Fail Over Input Select (Command: m j)
►
Selects an input source for fail over. (This feature is
only available when Fail Over is set to Custom.)
Transmission
(m)(j)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)( )
(Data4)...( )(DataN)(Cr)
Data 1-N (Input priority 1-N)
Data 20: AV1
Data 21: AV2
Data 22: AV3
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Data 93: HDMI4
Ack
(j)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)
(Data4)...(DataN)(x)
* Some input signals may not be available for all
models.
* The data number (N) may vary depending upon the
model. (The data number depends on the number
of supported input signals.)