ENGLISH
18
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
• If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
• An antenna cable and converter are not
supplied.
• Supported DTV Audio : MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
• For a location that is not supported with
ULTRA HD broadcasting, this TV cannot
receive ULTRA HD broadcasts directly. This
TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the
related standards have not been confirmed.
(Depending on model)
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
Euro scart connection
(Depending on model)
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable.
Output Type
Current
input mode
AV1
(TV Out
1
)
Digital TV
Digital TV
Analogue TV, AV
Analogue TV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
• Any Euro scart cable used must be signal
shielded.
• When watching digital TV in 3D imaging
mode, only 2D out signals can be output
through the SCART cable. (Only 3D models)
• If you use the Time Machine function on
digital TV, TV out signals cannot be output
through the SCART cable.
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV
mode.
• Check if the CI module is inserted into the
PCMCIA CARD SLOT in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
CARD SLOT.
• If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Antenna/Cable/Satellite
Service Operator.
Содержание 49UF7787
Страница 31: ......