10
ENG
ENGLISH
PRODUCT INSTALLATION
Precaution
Do not lift up the product by holding a corner.
Do not hold the screen area when holding the
product.
Use a soft cloth moistened with n-hexane to
remove dust or stains on the screen.
Correct Method
Incorrect Method
y
y
Make sure the power is disconnected before
moving or installing the product. Otherwise
electric shock may occur.
y
y
Wear working gloves when installing the
product. Do not use bare hands. Otherwise,
it may cause personal injury.
y
y
If you install the product on a ceiling or
slanted wall, it may fall and result in severe
injury.
y
y
Do not fasten the screws too tightly; this may
cause damage to the product and void your
warranty.
y
y
Use M3 x 4 mm screws to mount the
monitor. Any damages or injuries caused by
misuse or use of improper accessories are
not covered by the warranty.
y
y
If a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
y
y
To prevent image sticking, do not play a still
image for more than two hours.
y
y
Recommended operation time for optimum
performance and reliability is 12 hours or
less per day.
CAUTION
CAUTION
