28
206-4324
Initiate the Express Script
Note:
The Express Script configures the TV for FTG Mode via CPU operation with Hospital
Mode features. This means that while the TV is functioning in FTG Mode, Hospital Mode is enabled
(i.e., Installer Menu item 027 HOSPITAL MODE is not set to 0). In addition, you can create custom
channel lineups for Channel Banks 1 to 4.
Note:
While the Express Script enables you to set up TVs individually in lieu of cloning, you can also
use the resulting Express Script TV Setup for cloning purposes, if desired. However, note that TV
setup menu customization via the Express Script is limited to Channels Menu options.
After you select the “Express Script” option from the First Use Wizard Welcome screen, an Express
Script Welcome screen provides a brief introduction to the Express Script.
WELCOME TO THE EXPRESS SCRIPT
.
Use the Express Script to configure the TV for Free-To-Guest (FTG) via CPU operation (including
pillow speaker setup). If a Pro:Centric server is installed, the Express Script also enables you to
configure the Pro:Centric settings on the TV.
.
If you simply wish to exit the Express Script, select
X
in the top right corner of the screen.
Select NEXT to continue.
X
NEXT
From the Express Script Welcome screen, you have the following options:
• To proceed with the Express Script, use the arrow keys on the Installer Remote to select
NEXT
.
Then, press
OK
on the Installer Remote.
Note:
Select this option even if you only intend to configure the Pro:Centric settings on this TV.
After you configure the Pro:Centric settings, you will have the option to exit without completing
the remainder of the wizard, if desired.
•
To exit the Express Script without completing any configuration, use
the arrow keys on the
Installer Remote to select/highlight the
X
button, and then press
OK
. In the confirmation pop-up
window, select
EXIT
, and then press
OK
once more on the Installer Remote.
Configure Pro:Centric Settings
The next screen enables you to set up the Pro:Centric feature of the TV (see screen examples
below). By default, the Data Channel is configured for Auto Search, which enables the TV’s Data
Channel Auto Search feature to set the Data Channel value. See item 119 DATA CHANNEL
description on page 53 for further information on the Data Channel Auto Search feature. The
Pro:Centric Application Mode default setting is “Configuration Only,” which enables remote manage
-
ment only. That is, the TV will search for TV E-Z Installation data downloads; however, Pro:Centric
application data will not be downloaded, i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0.
Express Script
(Continued on next page)
