LG 43UV770M Скачать руководство пользователя

Страница: 11 / 123

206-4324

Commercial Mode Overview (Cont.)

• Start Channel set for RF or IP delivered content.
• Pro:Centric data delivery over RF or IP.
•

TV Zoning (Installer Menu items only) and Wi-Fi Zoning options for location-specific configurations.

You must use the Pro:Centric Direct Admin Client / Channel Map configuration utility to create the

Pro:Centric Direct Channel Map

, define channel attributes, and set the Start Channel. Refer to

the

Pro:Centric Direct Admin Client User Guide

for further information.

Note:

TV Zoning and Wi-Fi Zoning features are supported via “.tlx” file—typically a Clone (.tlx) file that has

been created from a Master TV Setup. See Reference section, “Using the TV’s Zoning Features,” for further

information.

While the TV is in Application Tuning Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu

items will be read-only.

• While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB

memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made

remotely via the Pro:Centric server / Pro:Centric Direct Admin Client. The Admin Client’s Channel Map

configuration utility enables you to create and edit the Pro:Centric Direct Channel Map, while the TV

Configuration utility (in conjunction with a Clone [.tlx] file loaded on a server carousel) enables you to

make changes to TV Installer Menu and/or Setup Menu settings.

• If it becomes necessary to restore the TV to Pass-through Mode, it is possible to do so. See Reference

section, “Restoring Factory Defaults on the TV(s),” for further information.

Refer to the

Pro:Centric Direct Admin Client User Guide

for further information on configuration and

management via the Pro:Centric Direct Admin Client.

Determining the TV Operating Mode

To determine the operating mode of the TV, press

MENU

on the Installer Remote. The menu displayed

depends on the operating mode. See examples below.
If the Function Menu appears, the TV is in a mode (FTG, ATM, PPV, etc.) that does not allow the end

user to change the fundamental TV setup. If the TV setup menus (Quick Settings) appear, the TV is in

Pass-through Mode.

Function Menu

Indicates the TV is not in

Pass-through Mode . While

the TV is in this mode,

Installer Menu settings can

be accessed as read-only.

TV Setup Menus

Shows that the TV is in

Pass-through Mode .

Aspect Ratio

Sound Out

Audio Mode

General

Safety

Accessibility

Aspect Ratio

16:9

Just Scan

Off

ASPECT RATIO

Содержание 43UV770M




























































































































Результаты поиска

Содержание 43UV770M

Отзывы:

Похожие инструкции для 43UV770M

Бренды по названию

Популярные бренды

LG 43UV770M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 43UV770M

Отзывы:

Похожие инструкции для 43UV770M

Бренды по названию

Популярные бренды