LG 43UV570H Скачать руководство пользователя страница 25

Страница: 25 / 95

206-4325

EZ-Manager Wizard (Cont.)

USB Configuration via EZ-Manager Wizard

With either the TV Configuration Options or the Zone, Label, and Room Number screen on display,

proceed as follows to configure the TV using the USB memory device.

Insert the USB memory device with the appropriate file(s) into the TV’s USB port.

2. Use the arrow keys on the Installer Remote to select

USB CONFIGURATION

, and then press

You will be redirected to the TV Manager / USB download options.

Select the file(s) to download, and then select UPDATE below.

Logo Image Download

Splash Image ProC.jpg

Insert Background Image(s)

None

Update TV Software

UV570H_CPU_SW.epk

Update PTC Software

UV570H_PTC_SW.txt

Import Clone File

UV570H_IM.tlx

USB DEVICE

TV MANAGER

Ez Download

USB 1:

Device Name

Ez Download

Logo Image Download

Insert Background Image(s)

Update TV Software

Update PTC Software

Import Clone File

Diagnostics

UPDATE

Image1.jpg Image2.jpg

Image3.jpg

Image4.jpg Image5.jpg

Image6.jpg

Image7.jpg Image8.jpg

Image9.jpg

Note:

You can select the

button at the top right corner of the screen and press

on the

Installer Remote at any time to return to the EZ-Manager Wizard.

Note:

Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

3. Select the appropriate option from the TV Manager, and initiate the desired download(s).

Update progress will be displayed on the screen. Do NOT remove the USB device while

updates are in progress. When the update process is complete, the TV will reboot. Uponrestart,

depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options

screen will be redisplayed (software and/or image updates only) or the TV will tune according

to the Start Channel setting in the Installer Menu (TV configured with Clone/Configuration file).

Note:

If the TV Configuration Options screen is redisplayed (software and/or image updates

only), you can either proceed with configuration via the EZ-Manager Wizard or exit the EZ-

Manager Wizard, as required.

4. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are

resident on the TV.

Содержание 43UV570H
































































































Результаты поиска

Содержание 43UV570H

Отзывы:

Похожие инструкции для 43UV570H

Бренды по названию

Популярные бренды

LG 43UV570H, Руководство по установке

Результаты поиска

Содержание 43UV570H

Отзывы:

Похожие инструкции для 43UV570H

Бренды по названию

Популярные бренды