LG 43LX774H Скачать руководство пользователя страница 69

Страница: 69 / 96

206-4309

Reference: Downloading a Splash Screen Image using a USB Memory

Device

This section describes how to download a splash screen image using the TV Manager “Logo

Image Download” option, though you may also use the Ez Download utility to download the splash

screen image, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.

Splash Screen Image File Guidelines

• The splash screen image may be either a baseline or progressive JPEG or a 24-bit (RGB

8x8x8) BMP.

•  A JPEG image should be no larger than 6 MB.
•  A BMP image should be no larger than 5.93 MB.
•  The maximum resolution allowed for the splash screen image is 1920 x 1080 pixels (FHD).
•

Avoid using special characters, such as ?, &, @, etc., in the splash screen image filename.

Before You Begin

•

The splash screen image file must be stored in a folder named “LG_DTV” in the root directory

of the USB memory device.

• Ensure the USB device has been formatted with FAT format.

Download the Splash Screen Image

1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.
2. Press

MENU

SETTINGS

on the Installer Remote to display the TV setup menus (TV is in

Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode).

3. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the

screen, select the

All Settings

menu icon and press

to access the advanced TV setup

menus.

4. Use the arrow navigation keys to select/highlight either the

General

menu icon from the TV

setup menus or the

Safety

menu icon from the Function Menu. Then, press the number “

”

key a total of seven times to access the TV Manager (see example on following page).

Note:

Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

5. If more than one USB memory device is currently connected to the TV, be sure to select the

USB device that contains the image file you wish to use. If necessary, use the arrow keys on

the Installer Remote to select/highlight the

USB DEVICE

button in the top right corner of the

screen and press

. Then, use the Up/Down arrow keys to select the appropriate USB device

from the pop-up list of USB devices displayed at the top of the screen.

USB Device

USB 1: Device 1
USB 2: Device 2

(Continued on next page)

Содержание 43LX774H

































































































Результаты поиска

Содержание 43LX774H

Отзывы:

Похожие инструкции для 43LX774H

Бренды по названию

Популярные бренды

LG 43LX774H, Руководство по установке

Результаты поиска

Содержание 43LX774H

Отзывы:

Похожие инструкции для 43LX774H

Бренды по названию

Популярные бренды