70
206-4340
Reference: Using the TV Zoning Feature
This section describes the TV Zoning feature available with the LT570H model TVs. The TV Zoning
feature enables you to create localized configurations for TVs in selected “Zones” within the installation site,
for example, a hotel lobby, fitness center, restaurant, etc
. This feature is primarily intended for use when
the TV is configured for FTG Mode via CPU operation. However, selected elements of TV Zoning (Installer
Menu and Setup Menu profile Zone assignments) may also be used with TV cloning processes using a
Clone (.tlx) file.
Refer to the appropriate section(s) below for further information on the TV Zoning feature and how to set the
TV Zone # in a TV that is currently in Pass-through Mode.
Using the TV Zoning Feature with FTG Mode via CPU Configuration
The Cloud Configuration Tool may be used to create an FTG Configuration (.tlx) file that contains multiple
Installer Menu and Setup Menu profiles, each with its own Zone assignment. Up to nine unique Zones
can be designated for LT570H FTG Installer Menu and/or Setup Menu profiles.
Zone restrictions can also
be placed on individual channels in the FTG Channel Map. Thus, for example, you may create an FTG
Installer Menu and/or Setup Menu profile to specifically configure a TV in the hotel lobby and also restrict
the channels that are available to be tuned on that TV.
The TV Zone # must be set appropriately on each TV in order for the TVs to be configured correctly. See
“Set the TV Zone # in the TV” on the following page, and set the TV Zone # in all the TVs in a select area,
so that the TVs are configured with corresponding FTG Installer Menu and/or Setup Menu settings and/or
can omit channels that have been restricted in the FTG Channel Map. TV Zone 0 is the default TV Zone #.
The following subsections briefly describe how to assign Zones in the Cloud Configuration Tool. Refer to
the
Cloud Configuration Tool User Guide
for further information.
FTG Installer Menu Profile Zone Assignments
The Cloud Configuration Tool / Installer Menu web page enables you to create multiple Installer Menu
profiles for the same chassis model, each with a different Zone assignment (default = Zone 0), to be
included in an FTG Configuration (.tlx) file. For example, you may wish to create one Installer Menu profile
for the LT570H TV in the hotel lobby and another Installer Menu profile for the LT570H TV in the fitness
center, both of which are different from the Installer Menu profile used for LT570H TVs in standard guest
rooms. The TV Zoning feature enables you to save multiple LT570H FTG Installer Menu profiles, each with
its own Zone assignment, in one FTG Configuration (.tlx) file. If each TV in the aforementioned locations
(Zones) has had its TV Zone # set appropriately, as described in the procedure on the following page or
via the EZ-Manager Wizard, the TV(s) will only be configured by the Installer Menu profile that matches
its(their) Zone setting.
In the Cloud Configuration Tool / File Manager web page, you can also change the Zone assignment for
each Setup Menu profile already present in the FTG Configuration List.
See the File Manager and Installer
Menu web page overviews on pages 48 and 50
for further information. Note that Setup Menu profiles cannot
be created in the Cloud Configuration Tool; they must be saved (exported) from a TV.
FTG Channel Map Zone Restrictions
In the
Cloud Configuration Tool / Channel Map web page,
you can place Zone restrictions on individual
channels that may be prohibited or deemed unsuitable for certain locations. One or more Zone restrictions
(1–8) may be placed on each channel that is to be restricted. For example, if you wish to restrict a channel
from Zones 2 and 4, select both “Zone 2” and “Zone 4” in the
Restricted from Zones field when defining or
editing that channel.
