LG 43LT570H Скачать руководство пользователя страница 25

Страница: 25 / 87

206-4340

Installer Menu

Typical Installer Menu

The Installer Menu header will vary

depending on the TV you are setting

up. In the Installer Menu footer, you

can see the current software versions

of the TV, as indicated.

Use the Installer Menu to set up, change, or view operational settings. This section describes how

to access, use, and exit the Installer Menu from the TV itself. However, you should also refer to the

Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG

Configuration (.tlx) file created using LG’s Cloud Configuration Tool or configuring the EBL locally

(.rml) or remotely (via FMA-LG102 / .fma) using the FTG Device Configuration Application software.

Refer to the table on pages 27 and 28 for brief descriptions of Installer Menu items. More

detailed descriptions follow the table listing.

Accessing the Installer Menu

1. Turn ON the TV.

If the EZ-Manager Wizard appears on the screen when you turn ON the TV, exit the wizard.

2. Using an Installer Remote, press

MENU SETTINGS

repeatedly until the on-screen display of

the TV setup menus (if the TV is in Pass-through Mode) or the Function Menu (if the TV is not

in Pass-through Mode) no longer toggles, and then press the Installer Menu entry sequence

(e.g.,

) +

to access the Installer Menu.

Note:

The default Installer Menu entry sequence is “9876”; however, if Installer Menu item 000

INSTALLER SEQUENCE has been modified, the entry sequence may be one of three additional

options. See Installer Menu detailed descriptions for further information.

The Installer Menu opens with item 000 INSTALLER SEQ 000.

Note:

If the password (entry sequence) is not entered or registered correctly, you will see the

message “ENTER PASSWORD 0000” at the top of the screen instead of the Installer Menu

header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will

display.

Note:

If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only. Also,

the TV Zone # will be indicated in the Installer Menu header under the configuration mode indicator

described on the following page.

PTC Version

CPU Version

PTC INSTALLER MENU

xxLT570H

CPU

CTV

000 INSTALLER SEQ 000

UPN 000-000-000-000

ASIC D279

PTC V#.##.###

CPU V#.##.##.##

Содержание 43LT570H
























































































Результаты поиска

Содержание 43LT570H

Отзывы:

Похожие инструкции для 43LT570H

Бренды по названию

Популярные бренды

LG 43LT570H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 43LT570H

Отзывы:

Похожие инструкции для 43LT570H

Бренды по названию

Популярные бренды