12
206-4340
EZ-Manager Wizard
The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or
manual) of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will
appear on the screen each time the TV is turned ON, until one of its configuration methods has
been completed or the wizard is exited. Use the Installer Remote to make selections and complete
each step.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the
wizard also offers Zoning as well as USB configuration options.
•
LT570H TVs support the TV Zoning feature, which enables location-specific configurations (see
Reference section, “Using the TV Zoning Feature,” for further information). The EZ-Manager
Wizard enables you to set the TV Zone # in the TV as part of the configuration process.
• The EZ-Manager Wizard also enables you to access the TV Manager / USB download options
as part of the configuration process, if desired, to perform USB configuration and/or update
functions.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the configuration process, as doing so will interrupt
the current step and may corrupt the configuration data.
Before You Begin
• If you plan to create a customized Master TV Setup using the procedure described on pages 36
, be sure to exit the EZ-Manager Wizard in order to avoid setup conflicts or setting modes
that may cause unintended behavior or restrict the custom setup procedure. See also “Initiate
Configuration or Exit the EZ-Manager Wizard” below.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can
be reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction.
If the Pro:Centric server is configured on the system/network and if no location-specific settings
are required in the TV, for example, TV Zone, Label, and/or Room Number settings, you can
simply turn ON the TV, and once initiated, the wizard will proceed through each of the configuration
steps with no further user interaction.
•
If any of the configuration steps fails, you will see a “Diagnostics” screen with an indication of the
failure. You will then have the opportunity to reinitiate the configuration process from the previous
screen or exit the EZ-Manager Wizard.
Initiate Configuration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager Wizard.
Note:
If there is no user action in this screen within 10 seconds, the wizard will proceed to the
first configuration step. Once the wizard has proceeded, it is not possible to return to the Welcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option
from the subsequent screen(s).
(Continued on next page)
