background image

25

NOTE

 

Before using the appliance, check if there is 

any detergent in the auto dispense box.

 

When the auto dispense box's detergent 

reservoir is filled with Liquid detergent, the 

detergent will last for about 18 standard cycles 

with half a load of laundry in the drum.

 

The default settings are configured to 

automatically dispense 70 ml of detergent and 

30 ml of softener for 4 - 6 kg of normally soiled 

laundry. This can be changed using the 

More 

Settings

 button. For more details, refer to 

“Auto Dispense”

.

 

When you wash laundry with a load size of 

4 - 6 kg, please refer to the recommended 

amount of the detergent as indicated by the 

detergent maker.

 

When you select 

Auto Wash

Auto Detergent

 

is automatically turned on.

 

Turn on the detergent/softener refill alarm to 

be notified of when to refill.

 

Remove any residual detergent outside the 

auto dispense box before refilling it.

 

Do not use force to pull out the auto dispense 

box.

 

Pour the Liquid detergent or softener into the 

respective reservoir and push the box back 

inside until you hear a clicking sound.

 

To set Auto Detergent in a programme 

where the use of a neutral detergent is 

recommended, press the Cancel button when 

you are prompted with the message to supply 

wool detergent. The detergent will then be 

dispensed automatically.

EN

CAUTION

 

Pull out the dispensing box only when refilling 

or replacing detergent.

 

Please use liquid detergents for drums only.

 

Do not put any detergent powder into the auto 

dispense box.

 

Do not put liquid bleach into the auto dispense 

box.

 

The auto dispensing function may not 

work properly with some concentrated 

gel detergents. Please add these types of 

detergents directly into the tub by using a 

separate cup instead to dispense the gel 

detergent.

 

Be careful not to mix detergent with a fabric 

softener.

 

When you pull out or insert the auto dispense 

box, the liquid detergent and the fabric 

softener may spill out onto the floor. Please 

wipe them away.

 

Before using the auto detergent/softener, 

make sure the 

Auto Dispense

 function is 

turned on in the Settings.

 

Do not leave detergent or fabric softener in the 

reservoirs for a long time as they may harden 

and fail to dispense automatically.

 

The holes on the left and the right as shown in 

the figure below are ventilation holes that help 

with the automatic dispensing of the detergent 

and softener. If you hold the dispensing box 

upside down, the detergent and the softener 

may leak out of it.

Ventilation 

hole

Ventilation 

hole

Front

Rear

 

If the ventilation holes are blocked, the Auto 

Dispense function may not work properly. 

Check them when you clean the dispensing 

box.

Содержание WD1610NSW

































































Отзывы: