LG-Ericsson ipldk-60 Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 512

LG-Ericsson ipldk-60 Скачать руководство пользователя страница 135

Issue 2.2

Feature Description and Operation Manual

127

8.4

SOS Page

Description

The system allows multiple pre-recorded VMIB messages to be used as paging
announcements. The user can then quickly send the pre-recorded announcement over the
assigned Page Zone. This function is often used to provide an emergency or SOS page.

Operation

To assign {VMIB SOS Page} at a flexible button,

1.  Press the [TRANS/PGM] button.
2.  Press the desired Flexible button.
3.  Dial the desired Page Zone code,
4.  Dial Message number (001-070).
5.  Press the [HOLD/SAVE] button.

To activate VMIB SOS paging:

1. Press the assigned {VMIB SOS Page} Flexible button.

Consideration



SOS Page is only available to a DKT using a Flexible button assigned for VMIB Page

Message.



The VMIB Page Message for SOS Paging must be recorded by the Attendant before the

SOS Page button for proper operation.



An SOS Page is not restricted by Page Time-out; the entire VMIB Page Message will be

heard over the paging facilities even if the Page Time-out timer expires.

«
...
133
134
135
136
137
...
»

Содержание ipldk-60

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов