LG-Ericsson ipldk-60 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 512

LG-Ericsson ipldk-60 Скачать руководство пользователя страница 126

Issue 2.2

Feature Description and Operation Manual

118

7.3

Paging Conference

Description

During a page placed over a Conference Page Zone (zones 506 ~ 510) a second station can
join the page and simultaneously transmit audio to the Conference Page Zone along with the
original paging station.

Operation

To join the Page Conference from a DKT,

1. Lift the handset.
2. Press [CONF] softkey.

To join the Page Conference from an SLT,

1.  Lift the handset.
2.  Momentarily press the hook-switch, intercom dial tone is received.
3.  Dial ‘5 8’.

Consideration



Page Time-out is not applied to a Paging Conference.



When the second party joins the Page Conference, Meet Me Page is disabled.



When the Page originator disconnects from the Page, the Page Zone(s) is returned to idle

and the second paging party is disconnected.



Any station can access a Page Conference once initiated, even if the station is denied

access to Paging.

Admin Programming

System Numbering Plan (PGM 109, Flexible button 5)

Assigns SLT code to join a Page Conference

Paging Warning Tone (PGM 161, Flexible button 4)

Enables warning tone before page announcements

Paging Access (PGM 111, Flexible button 8)

Enables Stations access to paging facilities

Conference Page Zone (PGM 119)

«
...
124
125
126
127
128
...
»

Содержание ipldk-60

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов