LIP-8008E User Guide
10
2.
Receiving Calls
2.1
Answering a Call While Idle
There are 3 basic types of incoming calls;
internal/external calls,
Intercom Voice Announce
calls,
and
Hold
recalls.
Your phone may be assigned
Ringing Line
Preference
; in this case, calls that ring are answered by
lifting the handset. Otherwise, you must press the
flashing Flex button.
External calls to an iPECS Phone will appear under the
CO/IP line button or a
LOOP
button. External calls are
from CO lines or VoIP channels that are programmed to
ring at your phone. For external calls,
Delay Ring
may
be assigned allowing others to answer the call before
the call rings at your phone.
Calls can be forwarded in some manner from another
user; if providing call coverage for other users, you may
also receive
Station Call Coverage
calls.
Calls placed on
Hold
, including Transfers, parked calls,
etc., will
Recall
if left on hold for too long.
ICM Voice Announce
calls are answered based on the
ICM Signaling mode
at the receiving phone; in Hands-
Free (HF) mode, after the splash tone and
announcement, speak normally into the microphone. In
the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode
can be assigned in
2.2
Responding to a Call While Busy
While you are busy on another call, you may receive a
Muted Ring, Camp-On tones, or Voice-Over
announcements. Muted Ring is provided over the
speaker of your Phone indicating a
Call Waiting
. You
also may receive
Camp On
tones, a burst of tone on top
To answer a call ringing at your phone:
•
Lift the handset and, then press the flashing Flex button (as
needed), the call will be connected.
To respond to an Intercom Voice Announce call:
•
Lift the handset to respond.
2. Receiving
Calls
