LG Chem RESU Series Скачать руководство пользователя страница 34

Страница: 34 / 37

Warranty

LG Chem protects this product under warranty when it is installed and used

as detailed in this manual. Violating the installation procedure or using the
product in any way not described in this manual immediately voids all war-

ranties on the product.

LG Chem does not provide warranty coverage or assume any liability for direct
or indirect damages or defects that result from the following causes:

• Improper transportation or storage

• Incorrect installation, wiring or handling

• Non-compliance with LG Chem’s installation or operation manual

• Operating the product in an inappropriate environment

• Incorrect or inappropriate operation

• Insufficient ventilation

• Failure to adhere to safety warnings or instructions

• Repairs or modifications performed by unauthorized personnel

• Inverter failure or overcurrent.

• Force majeure events

• External influences, such as unusual physical or electrical stress.

• Use of an incompatible inverter

Содержание RESU Series






































Результаты поиска

Содержание RESU Series

Отзывы:

Бренды по названию

Популярные бренды

LG Chem RESU Series, Руководство по установке

Результаты поиска

Содержание RESU Series

Отзывы:

Бренды по названию

Популярные бренды