Installation
4. Drill holes in the wall for M6 (¼ in)
screw anchors.
The drilling depth
should be at least 50 mm.
5. Drive the screw anchors through the
mounting brackets into the holes.
6. Tighten the screws to a torque of 5
N·m.
ON
OFF
CON
NEC
TION
KIT
7. There are holes for mounting brackets
on the top of the both sides of the bat-
tery pack. Secure the mounting brack-
ets to the holes using the M5 screws.
Tighten them to a torque of 5 N·m.
3.9
Checking before installation
There are things to check before installing the battery pack to ensure that it has
no defects.
CAUTION
Make sure that the inverter is turned off while checking the battery pack.
Circuit breaker switch
At the first installation, make sure that the circuit breaker switch is in the Trip
position between the
ON
and
OFF
positions.
19
