LEYBOLD 230680V01, Руководство по эксплуатации

Страница: 13 / 20

GA300553102_002_C2
– 04/2017
13
5.
Maintenance and Service
5.1 Maintenance
The GRAPHIX controller does not require any special maintenance work.
5.2 Configuration
With the help of this parameter group they have the possibility of securing and of restoring
your system parameters. In addition a suitable memory at the USB interface must be.
Further resetting of the system parameters is possible on factory-installed settings.
5.2.1 Save Data
To save the configuration parameters of your GRAPHIX controller proceed as follows:
•
Connect the USB stick with the USB socket at the front side of the equipment.
•
In the measurement mode, tap the touchscreen for approximately 1 second.
o
The main menu with an overview of the parameter groups is displayed.
•
To scroll, use the button .
o
On the next page, main menu page 2/2 is displayed. The current page number is
displayed in the upper section of the display.
•
In the main menu 2/2, tap on the parameter group Configuration.
•
In the parameter group Configuration, tap on the button Save Data .
o
The rest process starts.
o
On the memory at the USB interface the folder RECOVERY is installed.
o
Configuration data are stored in a file with the format rescue.txt on the USB stick in
the folder RECOVERY.
o
After the reset process has been completed the instrument will automatically restart
with the default parameters.
o
The GRAPHIX controller will now be ready for operation again.
•
When not wanting to run the reset, tap the button to cancel the reset process.
o
The main menu is then displayed again.
5.2.2 Restore Data
To restore the saved configuration parameters secured on an USB stick in the listing
RECOVERY in the file rescue.txt proceed as follows:
•
Connect the USB stick with the USB socket at the front side of the equipment.
•
In the measurement mode, tap the touchscreen for approximately 1 second.
o
The main menu with an overview of the parameter groups is displayed.
•
To scroll, use the button .
o
On the next page, main menu page 2/2 is displayed. The current page number is
displayed in the upper section of the display.
•
In the main menu 2/2, tap on the parameter group Configuration.
•
In the parameter group Configuration, tap on the button Restore Data .
o
The question „Are you sure?” is displayed to ensure that you really want to run the
reset.
•
When not wanting to run the reset, tap the button to cancel the reset process.
o
The main menu is then displayed again.
•
To run the process, tap the button Restore now .
o
The rest process starts.
o
After the reset process has been completed the instrument will automatically restart
with the default parameters.