Lexus RX400h2006, Руководство пользователя, Страница: 622 / 639

ELECTRICAL COMPONENTS
595
2. When turning the vertical movement adjusting bolt ( 2 ),
turn the Phillips
−
head screwdriver to the same direction as
step 1. To calculate the correct number of turns, multiply the
number of times you turned the screwdriver in step 1 by 1.25.
Turn the screwdriver by this amount.
REPLACING LIGHT BULBS
Before replacement, remove the engine compartment
cover. See “Removing the engine compartment covers”
on page 524.
The illustration on the following pages show the locations of
light bulbs. If it is necessary to replace a bulb, take your vehicle
to your Lexus dealer as soon as possible. Use bulbs with the
bulb numbers and wattage ratings given in the table.
The stop lights and tail lights consist of a number of LEDs. If
two or more LEDs burn out, your vehicle may not conform to
local laws (SAE). If this occurs, take your vehicle to your Lexus
dealer to have the light replaced.
CAUTION
To prevent burning yourself, do not replace the light
bulbs while they are hot.
Halogen bulbs have pressurized gas inside and
require special handling. They can burst or shatter if
scratched or dropped. Hold a bulb only by its plastic
or metal case. Do not touch the glass part of a bulb
with bare hands.
Vehicles with power back door system —
When replacing the rear light bulbs, turn off the
power back door system.