Lexus RX350 2023, Руководство пользователя, Страница: 322 / 604

322
4-5. Using the driving support systems
● Vehicles approaching from the parking
spaces next to your vehicle
*
● The distance between the sensor and
approaching vehicle gets too close
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■
Situations in which the system may not
operate properly
The RCTA function may not detect vehicles
correctly in the following situations:
●
When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
●
When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the position above the rear bumper
●
When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog
●
When multiple vehicles are approaching
with only a small gap between each vehi-
cle
●
When a vehicle is approaching at high
speed
●
When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow
●
When backing up on a slope with a sharp
change in grade
●
When backing out of a sharp angle park-
ing spot
● Immediately after the RCTA function is
turned on
● Immediately after the engine is started
with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing a trailer
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
● When a sensor or the area around a sen-
sor is extremely hot or cold
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or low-
ered due to the carried load
● When turning while backing up
● When a vehicle turns into the detection
area