Lexus LX 470, Руководство пользователя

Страница: 318 / 369

ENGINE
302
Oil identification marks
62L038
API Service Symbol ILSAC Certification Mark
Either or both API registered marks are added to some oil
containers to help you select the oil you should use.
The API Service Symbol is located anywhere on the outside
of the container.
The top portion of the label shows the oil quality by API
(American Petroleum Institute) designation such as SL.
The center portion of the label shows the SAE viscosity
grade such as SAE 5W−30. ”Energy−Conserving”, shown
in the lower portion, indicates that the oil has fuel−saving
capabilities.
The ILSAC (International Lubricant Standardization and
Approval Committee) Certification Mark is displayed on the
front of the container.
CHECKING THE ENGINE COOLANT
LEVEL
62X003d
1 Radiator cap 2 Upper line 3 Lower line
Look at the see−through coolant reservoir when the
engine is cold. The coolant level is satisfactory if it is
between the”FULL” and ”LOW” lines on the reservoir. If
the level is low, add ethylene−glycol type coolant for a
proper corrosion protection of aluminum components.
The coolant level in the reservoir will vary with engine
temperature. However, if the level is on or below the ”LOW”
line, add coolant. Bring the level up to the ”FULL” line.
Always use ethylene−glycol type coolant for a proper corrosion
protection of aluminum components. See information in the
next column.