manualshive.com logo in svg

Lexus GS300, Руководство пользователя

Поделиться
Скачать
Lexus GS300 Скачать руководство пользователя страница 423

STARTING AND DRIVING

402

(c) Setting operation

G31014

Each function is described below.

 1

Setting the desired speed

The transmission must be in “D”, “6” (sixth range), “5” (fifth
range) or “4”(fourth range) before you set the cruise control
speed.

After bringing the vehicle to the desired speed, press the
control lever downward in the “– SET” direction and release it.
This sets the vehicle at that speed.  At this time, the
multi

−

information display indicates settings such as the preset

vehicle speed, whether a vehicle is present ahead and
selected vehicle

−

to

−

vehicle distance.  If there is no vehicle

detected ahead, the dynamic radar cruise control screen does
not display the vehicle ahead.  At this time, you may take your
foot off the accelerator pedal.  If you need to accelerate 

−

 for

example, when passing 

−

 depress the accelerator pedal

enough for the vehicle to exceed the preset speed.  When you
release the accelerator pedal, the vehicle will return to the
control prior to acceleration.

You cannot set a desired speed if the master warning light
comes on, the warning tone sounds  and the multi

−

information

display indicates a warning message such as “CRUISE NOT
AVAILABLE”, “CLEAN RADAR SENSOR” or “CHECK
CRUISE SYSTEM”.  If any of the above messages appears on
the display, see “Vehicle

−

to

−

vehicle distance control mode

failure warning” on page 410.

If you turn off the “ON

−

OFF” button while the warning message

is displayed, the warning message turns off and the
multi

−

information display switches to another screen.  If no

warning message appears on the display, when you turn the
“ON

−

OFF” button on again, the setting can be made.

You can change the dynamic radar cruise control screen to
another screen even while the warning message is displayed.

Содержание GS300















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды