Lexus 2013 IS250C, Руководство пользователя

Страница: 445 / 624

445
4-3. Do-it-yourself maintenance
4
Main
tenance an
d care
Wheels
■
When replacing wheels
The wheels of your Lexus are equipped with tire pressure warning valves and trans-
mitters that allow the tire pressure warning system to provide advanced warning in
the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire
pressure warning valves and transmitters must be installed. (

P. 432)
If a wheel is bent, cracked or heavily corroded, it should be replaced. Oth-
erwise, the tire may separate from the wheel or cause loss of handling con-
trol.
■ Wheel selection
When replacing wheels, care should be taken to ensure that they
are equivalent to those removed in load capacity, diameter, rim
width, and inset
*
.
Replacement wheels are available at your Lexus dealer.
*
: Conventionally referred to as “offset”.
Lexus does not recommend using:
●
Wheels of different sizes or types
●
Used wheels
●
Bent wheels that have been straightened
■ Aluminum wheel precautions
●
Use only Lexus wheel nuts and wrenches designed for use with
your aluminum wheels.
●
When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).
●
Be careful not to damage the aluminum wheels when using tire
chains.
●
Use only Lexus genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.