Lexor LIBERTE, Руководство пользователя

Страница: 13 / 18

OPERATE Auto-Fill
™
/Jet Switch :
purchases
Locate the control panel at the front of the spa base. Follow the instructions below to operate the
pedicure spa.
● Twist Auto-Fill/Jet switch clockwise then release to start auto-fill. Water will automatically shut off
when it reaches the preset water level.
● To manually stop Auto-Fill water filling, twist the Auto-Fill/Jet switch clockwise again.
● Twist drain knob clockwise to start draining. Twist it back when the draining is done.
● Use “Hot/Cold water knob” to manually adjust the water temperature.
● To shut off the main water valve, follow the instructions on the right.
*** Water control knob is on by default. It should be shut down at the end of the day or
unattended to prevent water damage risks.
● By default, Eco-Jet automatically turns on when
the water level is up. To turn off the Eco-Jet manually,
click the “Whirlpool button” on the digital control panel.
*** DO NOT DRAIN WATER WHEN ECO-JET IS
RUNNING, OR THE DEVICE WILL BE BURNT
OFF.
12