Lexmark XM9100 Series, Руководство пользователя

Страница: 296 / 364

Incorrect characters print
Action Yes No
Step 1
Make sure that the printer is not in Hex Trace mode.
Note: If
Ready Hex
appears on the display, then turn off the printer,
and then turn it back on to deactivate Hex Trace mode.
Is the printer in Hex Trace mode?
Deactivate Hex Trace
mode. Go to step 2.
Step 2
a
From the control panel, select Standard Network or Network [x] , and
then set PCL SmartSwitch or PS SmartSwitch to On.
b
Resend the print job.
Do incorrect characters print?
Contact customer
support .
The problem is solved.
Job prints from the wrong tray or on the wrong paper
Action Yes No
Step 1
a
Check if you are printing on paper that is supported by the tray.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 2.
Step 2
a
From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 3.
Step 3
a
Depending on your operating system, open Printing Preferences or
the Print dialog, and then specify the paper type.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 4.
Step 4
a
Check if the trays are not linked.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Contact customer
support .
Troubleshooting 296