Lexmark XM9100 Series Скачать руководство пользователя страница 285

Страница: 285 / 364

•

Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web
site at

http://support.lexmark.com

or contact customer support, and then report the message.

Standard USB port disabled [56]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to clear the message.

•

Enable the USB port. From the printer control panel, navigate to:

Network/Ports

USB Buffer

Auto

Note:

The printer discards any data received through the USB port.

Supply needed to complete job

Do either of the following:

•

Install the missing supply to complete the job.

•

Cancel the current job.

The device is operating in Safe Mode. Some print options may be disabled or
provide unexpected results.

Touch

Continue

on the control panel to clear the message and continue printing.

Too many flash options installed [58]

Try one or more of the following:

•

Touch

Continue

on the control panel to continue printing.

•

Remove the extra flash memory:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra flash memory.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Too many trays attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra trays.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Troubleshooting

285

Содержание XM9100 Series













































































































































































































































































































































































Результаты поиска

Содержание XM9100 Series

Отзывы:

Похожие инструкции для XM9100 Series

Бренды по названию

Популярные бренды

Lexmark XM9100 Series, Руководство пользователя

Результаты поиска

Содержание XM9100 Series

Отзывы:

Похожие инструкции для XM9100 Series

Бренды по названию

Популярные бренды