Lexmark XM7100 Series, Руководство пользователя

Страница: 102 / 388

3
Navigate to:
Copy to > select the tray that contains transparencies > Copy It
If there are no trays that contain transparencies, then navigate to:
Manual Feeder > > select the size of the transparencies > > Transparency >
4
Load transparencies into the multipurpose feeder, and then touch Copy It .
Copying on letterhead
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
4
Navigate to:
Copy to > select the tray containing the letterhead > Copy It
5
If there are no trays that support letterhead, then navigate to:
Manual Feeder > select the size of the letterhead > Letterhead
6
Load the letterhead faceup, top edge first into the multipurpose feeder, and then touch Copy It .
Creating a copy shortcut using the printer control panel
1
From the home screen, touch Copy .
2
Adjust the copy settings, and then touch Save as Shortcut .
Note: If you change the settings after the copy shortcut has been created, then the settings are not
saved.
3
Type a unique name for the shortcut, and then touch Done .
4
Verify that the shortcut name is correct, and then touch OK .
If the shortcut name is incorrect, then touch Cancel , and then reenter the information.
Notes:
•
The shortcut name appears in the Copy Shortcuts icon on the printer home screen.
•
You can use the shortcut when copying another document using the same settings.
Copying 102