Secure the printer
Locating the security slot
The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop
computers in the location shown to secure the printer in place.
Erasing printer memory
To erase volatile memory or buffered data in your printer, turn off the printer.
To erase nonvolatile memory, device and network settings, security settings, and embedded solutions, do the
following:
1
From the home screen, touch
Settings
>
Device
>
Maintenance
>
Out of Service Erase
.
2
Touch the
Sanitize all information on nonvolatile memory
check box, and then touch
ERASE
.
3
Touch
Start initial setup wizard
or
Leave printer offline
, and then touch
Next
.
4
Start the operation.
Note:
This process also destroys the encryption key that is used to protect user data. Destroying the
encryption key makes the data irrecoverable.
Erasing the intelligent storage drive
1
From the home screen, touch
Settings
>
Device
>
Maintenance
>
Out of Service Erase
.
2
Touch
Erase Intelligent Storage Drive
, and then touch
ERASE
.
3
Start the operation.
Notes:
•
The intelligent storage drive (ISD) is cryptographically erased.
Secure the printer
60
Содержание XM3142
