Lexmark XM3142, Руководство пользователя

Страница: 34 / 273

Connected to different wall jacks
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to an active analog wall jack.
Notes:
•
If you have only one telephone number on your line, then set the printer to receive faxes automatically.
•
Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer Rings to Answer setting to
6 .
Setting up fax in countries or regions with different telephone wall jacks
and plugs
Note: These instructions apply only to printers that support analog fax. For more information, see “Supported
fax” on page 29 .
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
Set up, install, and configure 34