Lexmark XM3142, Руководство пользователя

Страница: 24 / 273

Using Display Customization
Before using the application, make sure to do the following:
•
From the Embedded Web Server, click Apps > Display Customization > Configure .
•
Enable and configure the screen saver, slideshow, and wallpaper settings.
Managing screen saver and slide show images
1
From the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud
‑
based notifications.
2
Apply the changes.
Changing the wallpaper image
1
From the home screen, touch Change Wallpaper .
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow .
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the flash drive again to view the images.
Using Customer Support
Notes:
•
This application is supported only in some printer models. For more information, see “Supported
applications” on page 22 .
•
For information on how to configure the application settings, see the Customer Support Administrator’s
Guide.
1
From the home screen, touch Customer Support .
2
Print or e
‑
mail the information.
Setting up Device Quotas
Notes:
•
This application is supported only in some printer models. For more information, see “Supported
applications” on page 22 .
Set up, install, and configure 24